"centrifugal air blower"

Mineral Powder Sintering Stainless Steel Coupling Driving Blower Centrifugal Fan Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 °C, the V-belt driving type fan can transport media below 150 °C

Coupling Driven Energy Saving Flue Gas Centrifugal Blower Fan Introduction The Coupling Driven Energy Saving Flue Gas Centrifugal Blower Fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the Coupling Driven Energy Saving Flue Gas Centrifugal Blower Fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are

AC Electric Current Type Stainless Steel Centrifugal Ventilation Draf Blower Introduction 6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. The output gas flow is slightly larger than the 6-11 series heavy-duty centrifugal fan, the air volume is large, and the pressure is high, smooth operation, high reliability and long life. AC Electric Current Type

Stainless Steel Gas Materials Delivery Centrifugal Blower Long Lifetime Fan Introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler, circulating

Mineral Powder Sintering Stainless Steel Blower Centrifugal Fan Introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles contained in the medium are not more than

Heavy Duty Double Inlet Large Capacity Flue Gas Centrifugal Blower Fan Introduction The Heavy Duty Double Inlet Large Capacity Flue Gas Centrifugal Blower Fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of Flue Gas Centrifugal Blower Fan can also be used for dust removal, mine ventilation and general ventilation

Metallurgy Industrial Boiler Waste Gas Dust Collecting Blower Fan Introduction The 7-09 series medium pressure centrifugal fan has moderate pressure and large flow, belongs to the low noise series fan and has stable performance. It’s suitable for conveying normal temperature or high temperature non-flammable gas (normal air, high temperature gas, corrosive gas, dusty gas), and conveying granule/powder/chip/fiber material. It’s a widely used medium-pressure heavy-duty

Efficient Energy-Saving Stainless Steel Industrial Kilns Centrifugal Blower Fan Introduction 6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature. The output gas flow is slightly larger than the 6-11 series heavy-duty centrifugal fan, the air volume is large, and the pressure is high, smooth operation, high reliability and long life. Efficient Energy

Building Ventilation Induced Draft Air Supply Centrifugal Blower Fan Introduction It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above